Vpn With Wireguard

2 min read

安装

sudo add-apt-repository ppa:wireguard/wireguard
sudo apt-get update
sudo apt-get install wireguard -y
  • 打开安全组

配置

  • 创建key

    wg genkey | tee privatekey | wg pubkey > publickey

private_key=$(wg genkey)
public_key=$(echo $private_key | wg pubkey)

  • 配置

    
ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
   valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
   valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9001 qdisc pfifo_fast state UP group default qlen 1000
link/ether 0a:81:39:72:97:90 brd ff:ff:ff:ff:ff:ff
inet 10.12.0.154/24 brd 10.12.0.255 scope global eth0
   valid_lft forever preferred_lft forever
inet6 fe80::881:39ff:fe72:9790/64 scope link
   valid_lft forever preferred_lft forever

/etc/wireguard/wg0.conf

[Interface]
PrivateKey = AKUINjvxFqVLMiJc7qX95bEyiRlqnAWFHpy3hLeCI1s=
Address = 10.12.4.1/24
ListenPort = 51820



PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE



[Peer]
# My laptop (this is just a comment, change it to identify the device)
PublicKey = k2XMyPcLbPcNhJ5ThKrwbzNPMw6h1JKkDOcw1rqstF4=
AllowedIPs = 10.12.4.0/24

  • 启动

    sudo wg-quick up wg0

sudo wg show wg0 help

sudo netstat -anp|grep 51820
udp        0      0 0.0.0.0:51820           0.0.0.0:*                           -
udp6       0      0 :::51820                :::*

查看正在使用的密钥对

wg show wg0 dump

  • 显示公钥和vpn服务运行状态

    sudo wg

  • 启动主机路由

    sudo sysctl -p
net.ipv4.ip_forward = 1

stop

sudo wg-quick down wg0

客户端

Vpn客户端设置参考

PS: Wireguard在前几天被合并到LINUX的内核代码

https://www.linuxbabe.com/ubuntu/wireguard-vpn-server-ubuntu

VPN SDN NFV

Related